Good day all, i need help to solve some points of this exercice!
The candiate has to size the loop ring pipe and primary air receiver AS1 in a compressed air system given that
• Standard conditions
• Compression ratio 7
• Max pressure drop in the loop 0.1 bar
The first part has been solved
My problem come after calculating the pressure drop using the following formula
Dp = pressure drop (bar)
QC = Air demand (m3/s of free air)
L = length (m)
d = internal diameter (mm)
p = pressure (bar) (abs)
the compression ratio is 7 so In my case P=7 bar
This table displays the results of the professor
I can’t find the same value of the pressure drop in branch 1 and 3 (colored in yellow)
Any help would be highly appreciated!
Forum about flow calculators available on pipeflowcalculations.com and how to find solution for your fluid flow problem.
1 post • Page 1 of 1