Drain pipe flow with two sections of different pitch

Forum about flow calculators available on pipeflowcalculations.com and how to find solution for your fluid flow problem.
Post Reply
rfb321
Posts: 1
Joined: Thu Sep 28, 2017 1:39 am

Drain pipe flow with two sections of different pitch

Post by rfb321 »

I'm trying to evaluate the flow rate of an existing backyard storm drain system that runs from a catch basin at the back of the yard to a storm drain manhole in the street with the following:

Total length - 188 feet

Pipe and size - 8" PVC SDR 26

Pitch or slope - 2.5% for the first 65 feet starting at the back yard catch basin, and the dropping off to .5% for the next or last 123 feet to the street.

So, my question is, what real slope or flow rate does is this similar to? I'm thinking that the first 1/3 of the run at 2.5% will provide a push to the remaining 2/3 of the run (at .5%) that will add to the volume of water able to be carried in that .5% run. But, will the total flow capacity be greater than if it were just a .5% slope for the entire 188 feet?
Post Reply