I have a centrifugal pump with a flow rate of 6 gallons per minute which feeds a 2 inch pipe that has a pressure control valve set at 20 pounds per square inch. The reduced pressure fluid goes thru a holding tube that hold 11.44 gallons and discharges thru a 3/8" orifice to an open top tank. What will my holding time be? How does my holding time change if I change the pressure control valve to be set at 24 pounds per square inch?
Thanks for you help.
Forum about flow calculators available on pipeflowcalculations.com and how to find solution for your fluid flow problem.
1 post •Page 1 of 1