Thanks first of all for a wonderful software. Hoping that someone can help me out here.
Am I correct that the software will warn if the flow through the line will be choked?
I am trying to size an Analyser fast loop in 1/2" OD tubing. The run length will be 100 mtrs and a pressure drop of 1640 kPa. Fluid is a gas with density 12.52 kg/m3, flowing at 37 C, and viscosity 0.01 cP.
I would need a flow velocity of at least 30 mtrs/s to achieve the required response times.
Thanks in advance.
Forum about flow calculators available on pipeflowcalculations.com and how to find solution for your fluid flow problem.
1 post • Page 1 of 1