I've attached a document which hopefully explains what I am trying to do and the formulae involved. The SAO flow is derived from equation 4 in the document and equations 5, 6 and 7 are used to calculate variables for this formula.
I know I've gone wrong somewhere and I've been over it a hundred times but can't figure it out.
![Confused :?](./images/smilies/icon_e_confused.gif)
In terms of Raw Data, I have 10Hz data for SAO inlet P (kPa), SAO dP ("H2O), SAO T(degC) and Barometric Pressure (kPa). The SAO inlet diameter is 100inches (which I believe is just entered as a large number) and the throat diameter is 3.348in.
Can anyone please have a look through this and try to spot the error for me?
let me know if you need more info or example data.